Public offer agreement
Version of 7 September 2026
This document is an offer by IE “Dipner P.P.”, IIN 801124300252, address: 190/1 Novoselov St, Karaganda, 100017, Republic of Kazakhstan (hereinafter the “Contractor”), to enter into an agreement on the terms set out below. DIPNER / DIPNER Group are trade names of the Contractor.
1. Terms and general provisions
1.1. Customer — an individual or legal entity, sole proprietor, or their authorised representative who has submitted a request and accepted the terms of this Offer.
1.2. Order — a list of products and/or services agreed by the parties, with their specifications, quantity, cost and deadlines, recorded in an invoice, commercial proposal, specification, correspondence or other confirmation from the Contractor.
1.3. Layout — a graphic or technical file, visualisation, drawing or other material defining the appearance of the product.
1.4. Acceptance of the Offer is payment of the issued invoice or the agreed prepayment. If applicable law or a document signed by the parties provides for a different moment of concluding the contract, that document or the mandatory rule of law applies.
1.5. Individually agreed Order terms take precedence over this Offer. In the event of conflict, the following order applies: signed contract; specification or order; invoice and commercial proposal; this Offer.
2. Subject of the contract
2.1. The Contractor undertakes to manufacture products and/or provide advertising and production services, and the Customer undertakes to accept and pay for the result on the agreed terms.
2.2. An Order may include design, prepress, printing, outdoor and indoor advertising, signs, promotional textiles, promotional merchandise, printing, engraving, embroidery, 3D models, delivery, installation and other agreed works.
2.3. Images and prices on the Website are for information only. Final specifications, cost and lead times are determined after the brief has been reviewed and are confirmed by the Contractor.
3. Placing and approving the Order
3.1. The Customer provides a complete technical brief, texts, dimensions, quantities, materials, colour requirements, deadlines, delivery or installation address and any other necessary information.
3.2. Before the Order is launched, the Customer must check and approve the Layout in writing, including texts, spelling, phone numbers, addresses, QR codes, dimensions, proportions, placement of elements and completeness.
3.3. Approval may be given by email, WhatsApp or another agreed channel in a message that unambiguously confirms consent: «Approved», «To print», «To production» or similar wording.
3.4. After the Layout is approved, the Customer is responsible for any errors they did not notice in the data they provided. The Contractor is responsible for the manufactured products matching the approved Layout and agreed specifications.
3.5. Changes after production has started are made where technically possible, may increase the cost and lead time, and are paid separately. Costs already incurred are non-refundable, except where the Contractor is liable.
4. Price and payment procedure
4.1. The price is stated in tenge in the invoice, commercial offer, order or specification. Unless expressly stated otherwise, the price includes applicable taxes in accordance with the Contractor’s tax regime.
4.2. The amount of prepayment and final payment is set out in the documents of the specific Order. In the absence of any other written condition, production begins after full payment has been received.
4.3. The payment obligation is deemed fulfilled when the funds are credited to the Contractor. The Customer pays bank fees independently unless the parties have agreed otherwise.
4.4. Additional work not included in the original quote is carried out after the cost has been agreed.
5. Lead times
5.1. The lead time starts from the next business day after all conditions have been met: the Order is agreed, the Layout is approved, the required payment has been received and the necessary materials have been provided.
5.2. The deadline is extended in proportion to any delay by the Customer in approval, payment, provision of information or access to the work site, and for the period of agreed changes.
5.3. Delivery and installation dates are agreed separately. Delays caused by the carrier, utility services, approving authorities or other third parties are not considered a delay by the Contractor if the Contractor acted reasonably and promptly notified the Customer.
6. Technological features and permissible deviations
6.1. The Customer understands that colours on screen may differ from the printed result due to device colour rendering, material, lighting, equipment profile and technology. An exact colour match is only guaranteed with a separately agreed colour proof, sample or reference.
6.2. Minor technologically determined deviations in shade, texture, dimensions, positioning, registration, cutting and print run are permitted within industry standards, the technical specifications of the equipment and material and the agreed sample, and do not in themselves constitute a defect.
6.3. For complex structures, corporate colours and critical dimensions, the parties may agree on a control sample, colour proof, technical drawing and special tolerances. Such requirements must be recorded before production starts.
6.4. Substitution of material or technology is permitted only with the Customer's consent, except for equivalent consumables that do not change the agreed functional properties and appearance.
7. Materials and third-party rights
7.1. The Customer guarantees that they are entitled to use the logos, trademarks, photographs, texts, images, personal data and other items provided and that their use does not infringe the rights of third parties or the law.
7.2. The Customer independently obtains the consent of persons depicted and any other necessary permissions. If third parties make justified claims, the Customer participates in settling them and reimburses the Contractor's documented losses arising from the unlawfulness of the Customer's materials, except where the Contractor is at fault.
7.3. The Contractor may suspend or refuse production of products containing clearly unlawful materials, without any obligation to break the law. The unused balance of the payment is refunded less actually incurred and documented expenses.
7.4. Exclusive rights to custom-developed design are transferred only to the extent and from the moment expressly agreed by the parties. Working files, source files, fonts and production documentation are not transferred automatically.
8. Handover, delivery, installation and acceptance
8.1. The method and place of handover of the result are determined by the Order. The risk of accidental loss passes upon actual handover to the Customer or to a carrier chosen by the Customer, unless mandatory rules of law or a written agreement provide otherwise.
8.2. On receipt, the Customer checks the quantity, completeness, packaging integrity and any obvious defects. Visible discrepancies should be recorded in the delivery note, a report, photos or video and reported to the Contractor without undue delay.
8.3. Hidden defects must be reported within the warranty period or, if none is set, within a reasonable time taking into account the nature of the product and legal requirements. The claim must include the Order number, a description and photos or video.
8.4. If a manufacturing defect is confirmed, the Contractor, at its discretion and in accordance with the law, will remedy the defect, remake the relevant part, reduce the price or refund the corresponding amount.
8.5. The warranty does not cover normal wear and tear, improper storage or use, mechanical damage, self-installation or repair, or exposure to chemicals, temperature, moisture, the power grid or weather beyond the agreed conditions.
8.6. For installation, the Customer provides access, safe conditions, power supply, and permits from the owner and government authorities, and informs the Contractor of any hidden utilities. Work stopped for reasons attributable to the Customer may be charged additionally.
9. Cancellation and refunds
9.1. Before launch, the Customer may cancel the Order by paying for the work actually performed and the Contractor’s documented expenses.
9.2. Once production of custom-made products has started, cancellation does not release the Customer from paying for work already completed, materials purchased and other documented costs. Consumer rights that cannot be limited by contract are fully preserved.
9.3. Goods of proper quality with individually defined properties, made specifically to an approved Layout, may be returned only in cases provided for by law or a written agreement between the parties.
10. Liability and force majeure
10.1. The parties are liable in accordance with the legislation of the Republic of Kazakhstan and the agreed Order documents.
10.2. The Contractor is not liable for defects caused by errors in the approved Layout or by incomplete or inaccurate data from the Customer, if the Contractor did not know and should not have known about them.
10.3. A party is released from liability for non-performance caused by extraordinary and unavoidable circumstances beyond its reasonable control, provided that it promptly notifies the other party and takes reasonable measures to mitigate the consequences.
11. Personal data and messages
11.1. Personal data is processed in accordance with the Privacy Policy, posted on the Website. Advertising messages require separate consent.
11.2. Legally significant notices and approvals are permitted via the email addresses, phone numbers and WhatsApp accounts used by the parties when placing the Order, provided that the sender's identity and the content of their intent can be reliably determined.
12. Disputes and final provisions
12.1. Claims should be sent to pavel@dipner.kz or at the Contractor's address. The parties shall seek to settle any dispute through negotiation; if no agreement is reached, the dispute shall be resolved in accordance with the procedure established by the legislation of the Republic of Kazakhstan.
12.2. Consumers retain the guarantees and jurisdiction provided by consumer protection legislation. The terms of the Offer shall not be construed as a waiver of mandatory rights.
12.3. The invalidity of any individual provision does not affect the remaining terms. The current version of the Offer is published on the Site; a specific Order is governed by the version in effect on the date of its acceptance, unless the parties have agreed otherwise in writing.
13. Contractor’s details
IE “Dipner P.P.”; IIN 801124300252; address: 190/1 Novoselov St., Karaganda, 100017, Republic of Kazakhstan; phone: +7 (7212) 910-222; email: pavel@dipner.kz; website: https://dipner.kz/. Bank details are stated in the invoice issued.
